Wideband Fabric Antenna for Ultra Wideband Applications using for Medical Applications

S. Bhavani; T. Shanmuganantham

doi:10.14429/dsj.72.17919

S. Bhavani Departments of Electronics Engineering, Pondicherry University, Puducherry - 605 014, India https://orcid.org/0000-0002-3242-070X
T. Shanmuganantham Departments of Electronics Engineering, Pondicherry University, Puducherry - 605 014, India https://orcid.org/0000-0002-2025-3844

DOI: https://doi.org/10.14429/dsj.72.17919

Keywords: Breast Cancer, CST, Textile Antenna, UWB

Abstract

Traditional cancer detection imaging techniques suffer high costs, high false negatives, high false positives,
and pain. The microwave imaging techniques overcome the limitations, which depend primarily on antenna design. If an antenna is wearable and implantable, the imaging system gives better results with less pain and cost. A wide band fabric antenna that operates at the ultra-wideband frequency with a low specific absorption rate (SAR) on breast phantom is verified. The proposed design has Jeans material as a substrate and the copper patch as a radiating element. The patch is designed in a circular shape with an M-type slot to suppress the spurious modes. The designed antenna model is commonly used for monitoring microwave imaging and has dimensions of 28X30X1.6 mm3. The proposed antenna design covers 2.3-8 GHz frequency with a broadside radiation pattern. The gain over the operating frequency is about 2.3-4.5 dB, and the efficiency is 55 %–79 %. The antenna model was designed and simulated in CST microwave studio. The performance of an antenna is tested on breast cancer to detect the presence of tumor cells in the breast. The antenna analysis on the phantom was done by considering the tumor location and corresponding results are presented. By varying the sizes of the tumor the antenna performance is analysed. The simulated SAR values of the proposed antenna design on breast phantom are under the limits of FCC.