Numerical Simulation of Projectile Impact on Mild Steel Armour Platesusing LS-DYNA, Part II: Parametric Studies

  • M. Raguraman Indian Institute of Science, Bangalore
  • A. Deb Indian Institute of Science, Bangalore
  • N. K. Gupta Indian Institute of Technology Delhi, New Delhi
  • D. K. Kharat Armament Research & Development Establishment, Pune
Keywords: Simulation, LS-DYNA, parametric study, mild steel plate, projectile, ballistic limit, numericalsimulation, modelling and simulation, Belytschko-Lin-Tsay shell, BLT shell, residual velocity

Abstract

In Part I of the current two-part series, a comprehensive simulation-based study of impact of jacketed projectiles on mild steel armour plates has been presented. Using the modelling procedures developed in Part I, a number of parametric studies have been carried out for the same mild steel plates considered in Part I and reported here in Part II. The current investigation includes determination of ballistic limits of a given target plate for different projectile diameters and impact velocities, and effects of plate thickness and projectile parameters such as mass,diameter and nose shape on residual velocity. In all cases studied, trends consistent with earlier experimentally-observed behaviours for similar impact problems have been found, there by establishing the potential of the present simulation technique using LS-DYNA as a powerful tool for the design of steel armour plates.

Defence Science Journal, 2008, 58(4), pp.573-581, DOI:http://dx.doi.org/10.14429/dsj.58.1679

Published
2008-07-01
How to Cite
Raguraman, M., Deb, A., Gupta, N., & Kharat, D. (2008). Numerical Simulation of Projectile Impact on Mild Steel Armour Platesusing LS-DYNA, Part II: Parametric Studies. Defence Science Journal, 58(4), 573-581. https://doi.org/10.14429/dsj.58.1679