- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor). Manuscript alongwith covering letter addressed to Editor is attached.
- The main submission file is in Microsoft Word. Other supplementery files are in original formats. Image and video files are of high quality.
- Where available, DOI and URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
- Manuscript is well checked with anti-plagiarism tool and Report is also attached.
Authors can submit their work for publication after online Registration with website. Our online submission system guides you stepwise through the process of entering your article details and uploading your files. In case of problem in uploading, a copy can be sent at firstname.lastname@example.org
Defence Life Science Journal will cater to the needs of scientists/researcher/academicians of life sciences, bio-medical sciences. Journal publishes research to feature recent progress in the field of defence/military life support system. Broadly it will cover; Physiology, Food technology, NBC warfare, Biotechnology, Pharmacology and Toxicology, Psychology, Bio-medicine, Bio-engineering, Bio-electronics, Non-invasive life imaging and much more.
The manuscript should be submitted online in MS Word format only. Files created in Latex may upload the PDF file.
Research articles (Technical contents: 4000 words) are expected to contain original research findings in a clear and concise manner. Papers reporting theoretical, laboratory and field test results are also considered for publication.
Review articles (Technical contents: 6000 words) are expected to survey, integrate, and critically examine new information accumulated in recent years in a particular subject field. A theme-based topic relevant in the area defence science & technologies. Review articles from subject experts are also commissioned by the Editor.
Short communications/research notes (Technical contents: 2000 words) are normally brief reports or technical notes on the progress of ongoing research and/or an application.
Article Processing Charges
No fee is charged for publication in Defence Life Science Journal
Plagiarism Check/Primary Scrutiny
Manuscript should be processed through a plagiarism detection tool before submission. Submitted manuscripts are processed through a plagiarism detection software tool at editorial desk of Defence Life Science Journal also. If plagiarism found in the manuscript by the online tool is above the acceptable limit, the manuscript will be rejected.
This journal uses double-blind review, which means that both the reviewer and author name(s) are not allowed to be revealed to one another for a manuscript under review.
Submission of Manuscripts
Authors should submit the Manuscript, typed in 12 fonts (Times New Roman), single space, A4 size (210 mm x 297 mm) format, with a margin not less than 25 mm on each side.
Please provide minimum details in and alongwith manuscript : (i) Covering letter, (ii) title page with a running (short) title, (iii) abstract, (iv) keywords, (v) nomenclature of symbols used, (vi) tables/figures/illustrations typed/drawn on separate sheets along with their captions in serial order as these appear in text, (vii) a separate list of figure captions, and (viii) Brief biodata with contribution in the current study. The reporting in the paper should be generally in third person.
A cover letter must be submitted with the manuscript. This should include the following information:
• Confirmation of the fact that the article is not under consideration for publication elsewhere.
• Each author should have participated sufficiently in any submission to take public responsibility for its content. Please provide full contact details for each author.
• The publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out.
• That the author(s) or author(s) institutions have no conflicts of interest.
It is mandatory on the part of the corresponding author to furnish the following certificate at the time of submission of the manuscript in the online submission.
This is to certify that the reported work in the paper entitled “..........” submitted for publication in the Defence Life Science Journal is an original one and has not been submitted for publication elsewhere. I/we further certify that proper citations to the previously reported work have been given and no data/tables/figures have been quoted verbatim from the other publications without giving due acknowledgement and without permission of the author(s). The consent of all the authors of this paper has been obtained for submitting the paper to Defence Life Science Journal.
[Signatures and names of all authors]
Essential title page information
• Title. Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible.
• Author names and affiliations. Please clearly indicate the given name(s) and family name(s) of each author and check that all names are accurately spelled. Present the authors' affiliation addresses (where the actual work was done) below the names. Indicate all affiliations immediately after the author's name and in front of the appropriate address.
• Corresponding author. Clearly indicate who will handle correspondence at all stages of refereeing and publication, also post-publication. Ensure that the e-mail address is given and that contact details are kept up to date by the corresponding author.
A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided. Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself. An abstract of about 200 words for research papers, about 150 words for review articles, and about 100 words for research notes and short communications should be provided along with the paper.
Provide a maximum of 6 keywords, using British spelling and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible. These keywords will be used for indexing purposes.
Subdivision - numbered sections
Divide your article into clearly defined sections. Each subsection is given a brief heading. Each heading should appear on its own separate line.
State the objectives of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already published should be indicated by a reference: only relevant modifications should be described.
The results should be clear and concise.
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often appropriate. Avoid extensive citations and discussion of published literature.
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of a Discussion or Results and Discussion section.
If there is more than one appendix, they should be identified as A, B, etc.
Define abbreviations that are not standard in this field. The nomenclature of mathematical symbols and signs used in the text should be given immediately after the keywords. Authors can follow any of the standard units and symbols developed by international agencies in their fields for this purpose. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Follow internationally accepted rules and conventions: use the international system of units (SI). If other units are mentioned, please give their equivalent in SI.
Language (usage and editing services)
Please write your text in good English (British usage is accepted). Check your paper thoroughly for
- Spelling errors, especially in your technical terminology.
- Proper syntax in the entire document. Syntax refers to the combination of words and symbols that form correct sentence structure.
- Correct subject-verb agreement. For example, ‘they is coming…’ should be corrected to ‘they are coming...’.
- Use of definite articles (the) and indefinite articles (a, an).
- Proper use of prepositions (of, to, on, onto, etc...).
- Complete and correct punctuation (full stops at the end of sentences, proper use of commas, semicolons, etc...).
- Spelling inconsistencies of the same word within the article.
- Consistency in the use of units of measurement.
- Avoid inconsistencies in active form (Ram threw the flower) and passive form (the flower was thrown by Ram).
- Be mindful of the rules and structure for switching between first and third person (switching from using the ‘I’ form to using the ‘he, she, you or they’ forms).
- Ensure proper use of metaphors and figures of speech.
- Be consistent in the use of British English spelling not American.
- Consistency in the use of a decimal comma (30,4) or a decimal point (30.4).
Tables should supplement and should not duplicate the information contained in the text. Tables should be explicitly referred to in the text in numerical order with brief titles. Column headings should be brief, bold and the units of measurement should be placed below the headings in parentheses. All Tables should be available with captions. Maximum Five (5) Tables are allowed in a manuscript.
All figures (charts, diagrams, line drawings, and photographic images) should be of good quality. Make sure all necessary files have been uploaded/attached. All figure captions are available. Illustrations should be numbered in order of their occurrence in the text with Indo-Arabic numerals and should have short descriptive captions. Lettering should be in capital only and large enough to be legible after a reduction of 50-60 per cent. Scanned/xeroxed images reproduced poorly need not be included. Illustrations taken from other publications must be acknowledged. It is the author’s responsibility to obtain permission for reprinting such illustrations in Defence Life Science Journal. The preferred format is encapsulated postscript (.eps) for line figures and .tif for halftone figures with minimum resolution of 300 dpi (dots per inch). Colour should be used only where absolutely necessary for understanding of the figure. Colour should not be used for distinguishing data in line diagrams. Maximum Six (6) figures are allowed in a manuscript. All Figures should be available with captions.
When chemical/mathematical equations are used in papers, these should be legible. The symbols, not covered in nomenclature (or when nomenclature is not given), should be explained immediately after their first usage in the text. Equations should be consecutively numbered in whole numbers in parentheses (for example, (2), (15), (19), etc.) at the right margin. Reference to the equations in the text should be abbreviated as Eqn (1), Eqns (5-7), etc. Complex structural formulae of chemical compounds should be prepared as illustrations. Capital, lower case and Greek letters should be distinguished clearly. Letters which are sometimes confused for one another (for example, O & 0; l & 1; V, v & n; r & p; X, x & c; K, k & k; E & e; etc.) should clearly be distinguished. When a Greek letter is used, it should be spelt out in the margin where it is first used.
Citation in text
Please ensure that every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be given in full. Unpublished results and personal communications are not recommended in the reference list.
Increased discoverability of research and high quality peer review are ensured by online links to the sources cited. In order to allow us to create links to abstracting and indexing services, such as Scopus, CrossRef, please ensure that data provided in the references are correct. Please note that incorrect surnames, journal/book titles, publication year and pagination may prevent link creation. When copying references, please be careful as they may already contain errors. Use of the DOI is encouraged.
As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Text: Indicate references by number(s) as superscript in line with the text. The actual authors can be referred to, but the reference number(s) must always be given. Example: '..... as demonstrated [3,6]. Barnaby and Jones  obtained a different result ....'
List: Number the references (numbers in superscript) in the list in the order in which they appear in the text. References are each numbered, ordered sequentially as they appear in the text, tables, boxes, figure legends.
The maximum number of references, strictly enforced, is 50 for an Articles.
Latest references should also be provided, otherwise an explanatory note should be provided separately. References to personal communication should not be placed under references, but should be cited in the text in parentheses. A reference should be listed only once. Use of ibid., idem., op.cit., should be avoided.
- Rao, M. & Ratnam, D. Faster acquisition technique for software-defined GPS receivers. Def. Sci. J., 2015, 65(1), 5-11. doi:10.14429/dsj.65.5579
- Weifan, C.; Fengsheng, L.; Jianxun, L.; Song, Hongchang & Yu, Jiyi. Nanometer Co3O4 powder by solid phase reaction. Cuitua Xucbao, 2005, 26(2), 1073-77 (Chinese).
- Wang, Z.J.; Birch, J.M. & Dickinson, M.H. Unsteady forces and flows in low Reynolds number hovering flight: Two-dimensional computations vs robotic wing experiment. J. Experimental Biol., 2004, 207(3), 449-60. doi: 10.1242/jeb.00739 http://jeb.biologists.org/cgi/content/full/207/3/449 [Accessed on 17 November 2007].
The electronic sources should include the URL and date of access.
Journal abbreviations source
Journal names should be abbreviated according to
List of title word abbreviations: http://www.issn.org/2-22661-LTWA-online.php
CAS (Chemical Abstracts Service): http://cassi.cas.org
However, single and double word journal titles (for example, Nature, Science, Scientific American) should be given in full.
- Hitchins, Derek K. System engineering: A 21st century systems methodology. John Wiley, England, 2007. 502 p.
Chapter from a Book
- Bodony, D.J. & Lele, S.K. Applications and results for large-eddy simulations for acoustics: Far-field jet acoustics. In LES for eddy acoustics, edited by C. Wagner, T. Huttl & P. Sagaut. Cambridge University Press, Cambridge, England, UK, 2005. pp. 289-310. doi: 10.1017/CBO9780511546143.008
- Lokesha, B.N. Advanced avionics and electronic warfare system for fighter aircraft. In DRDO Technology Spectrum. Defence Research and Development Organisation, Ministry of Defence, India, 2008. pp. 10-26.
- Ekstein, J.; Freitag, E.; Hirsch, C. & Sattelmayer, T. Experimental study on the role of entropy diffusion waves in low-frequency oscillations for a diffusion burner. In Proceedings of the ASME Turbo Expo 2004: Power for Land, Sea, and Air, ASME, Fairfield, NJ, 2004. doi:10.1115/GT2004-54163
- Savage, S.J. Defence applications of nanocomposite materials. FOI-Swedesh Defence Research Agency, User Report No. FOI-R-1524-SE. December 2004.
- Man, T.Y.; Leung, C.Y.; Leung, K.N.; Mok, P.K.T. & Chan, M. Single-transister-conrol low-dropout regulator. US patent 7285952, 23 October 2007.
- International Organisation for Standardisation. Document Management–Electronic document file format for long-term preservation–Part1: Use of PDF 1.4 (PDF/A-I). ISO 19005-1:2005, Geneva, Switzerland. ISO, 2005.
- De Roek, W. Hybrid methodologies for the computational aeroacoustic analysis of confined, subsonic flows. Katholieke University, Leuven, Belgium, 2007. (PhD Thesis).
DSJ accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the files in one of our recommended file formats with a preferred maximum size of 150 MB. Video and animation files supplied will be published online in the electronic version of your article in DSJ. Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Supplementary material can support and enhance your scientific research. Supplementary files offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips and more. Please note that such items are published online exactly as they are submitted; there is no typesetting involved (supplementary data supplied as an Excel file or as a PowerPoint slide will appear as such online). Please submit the material together with the article and supply a concise and descriptive caption for each file.
Final proofs of the papers will be sent for correction within three working days to the authors for clearance before sending the issue for printing.
Manuscript should be submitted online in MS Word format only. Files created in Latex may upload the PDF file. In case of problem in uploading, a copy can be sent at email@example.com
where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.