TY - JOUR AU - Ram Gopal AU - Jeevan Singh AU - Ghanshyam Das PY - 2013/01/01 Y2 - 2024/03/29 TI - Chemical Stablilisation of Sand : Part VIII Furan Resins as Dune and Coastal Sand Stabiliser JF - Defence Science Journal JA - DSJ VL - 40 IS - 2 SE - Chemical Science & Technology DO - 10.14429/dsj.40.4460 UR - https://publications.drdo.gov.in/ojs/index.php/dsj/article/view/4460 AB - Studies on furan resin as dune sand stabiliser are presented. Influence of acid catalysts, viz. phenol disulphonic acid, sulphuric acid, hydrochloric acid and phosphoric acid and other catalysts, viz. trichlorotoluene and benzoyl chloride along with promoters, zinc chloride and ferric chloride, on the strength of stabilised furan resin-sand specimens has been discussed. Optimisation studies on resin content, catalysts and promoters and curing conditions have revealed that maximum strength of 260 kg/cm/sup 2/ of the standard specimens made by compaction of coastal sand using furan resins (10 per cent), sulphuric acid (9N, 30 per cent) and a curing time of 2 hr at 40 degree Centigrade is higher than the 170 kg/cm/sup 2/ of specimens made of Rajasthan desert sand. Sandy patches stabilised by seepage technique recorded a maximum strength of 125 kg/cm/sup 2/. Physico-chemical characteristics of this system and effect of environment on stabilised specimens have also been studied and field trials conducted successfully. This resin-catalyst system would be extremely useful in humid and saline field (coastal) areas for different military applications. ER -