TY - JOUR AU - Y. Hemanth Kumar AU - R. Vijaya Kumar PY - 2020/02/10 Y2 - 2024/03/29 TI - Development of an Energy Efficient Stern Flap for Improved EEDI of a Typical High speed Displacement Vessel JF - Defence Science Journal JA - DSJ VL - 70 IS - 1 SE - Naval Systems DO - 10.14429/dsj.70.14669 UR - https://publications.drdo.gov.in/ojs/index.php/dsj/article/view/14669 AB - The surge in maritime trade is leading to large scale deployment of high-speed displacement ships by all nations. Cargo vessels are designed for a voyage in pre-determined routes at consistent speeds. On the other hand, high-speed displacement vessel engines designed with a capability to cater for top speeds are under-utilised during their normal course of operation. This sub-optimal utilisation impacts efficiency and increases emissions. In this study, a most favourable stern flap is designed for reducing the energy efficiency design index of a typical high-speed displacement vessel with a slender hull. CFD simulations and experimental model testing were conducted for 12 different stern flap configurations for determining most favourable flap design in the Froude no of 0.17-0.48. Performance of the most favourable stern flap was established by calculating, energy efficiency design index (EEDI) and fuel consumption based on typical operating profile. NOx, VOC and PM emissions were estimated in with and without flap condition. Studies demonstrated that the stern flap reduced effective power demand, average fuel consumption and emissions by about 8 per cent, which when considered for the ship’s operating life cycle, are significant. The most favourable stern flap reduced EEDI by 3.74 units and 1.98 units as compared to the bare hull condition and the required EEDI respectively, thereby demonstrating that EEDI could be used as an index to indicate stern flap efficiency. ER -